TRIANGLE, X, SQUARE, O, UP, DOWN, LEFT, RIGHT, R1, R2, L1, L2. You can pick any two buttons from the following choices: There is no default configuration for the MOD kits. What buttons will the ClickSticks be mapped to? This will ensure you have the correct version. Compare the circuit board inside with the pictures above. If your Sticker has worn and the serial number is not clear then the best thing to do would be to open your controller and check the circuit board inside. There should be a serial number on the left side which will correspond with the above list, under “Which Generation Controller Do I Have?”. Please check the sticker which is at the back of your controller. (If the holes need adjusting, its best to use a scalpel once the controller is closed.) All done. It would also help to cut away the following part of the rear shell to help with fitting the mod kit nicely: Step 3ĭismantle your controller and drill the back shell with 2 holes for ClickSticks. Check the generation of your controller carefully before buying mod kit. (not essential)īuy the correct version mod kit.

Hex key 0.9mm to tighten ClickSticks caps.

also good to adjust hole size after drilling.

Scalpel to clean any rough edges from drilling.

PH00 Screwdriver to unscrew the controller.

Drill with 5 or 5.5mm drill bit to drill the holes for the ClickSticks.

No Gluing, No soldering and No Wiring needed. The most complicated thing you will have to do is drill 2 holes into your controller shell. The MOD kit will be sent to you pre-soldered so all you have to do is place it into your controller. Buttons will have been configured by us using your specifications above. Simply insert the mod kit into your own ps4 controller and your good-to-go. Pick carefully and ask anything you are not sure of before purchase. There are different version PS4 controllers and all mod kits are different. Please choose the correct mod kit for your controllers. Please inspect the tutorial videos carefully before making your decision. If you are not good with small, fiddly parts then we do not recommend buying the mod kit. This is our DIY Mod Kit for you to install on your own controller

How to mod a ps4